Applying geophysics for groundwater exploration and/or resource evaluation is only about 10 to 15 years in practice. The ever-increasing need for groundwater has translated into using subsurface imaging to meet the demand. Generally speaking, the methods applied to find groundwater are very similar to those used for natural resource exploration; for example, mineral or petroleum products. However, the depth of exploration is much shallower. Groundwater projects conducted by Olson are typically in the upper 1000 feet of the ground surface, and can largely be categorized in one of three settings:
- Unconfined aquifer investigations in shallow unconsolidated alluvial deposits where saturated porous-media flow is the target;
- Confined aquifer investigations which is controlled by bedrock or ‘formation character’, for example shale versus sandstone, again targeting primary porosity conditions for an aquifer; or,
- Confined groundwater conditions related to a secondary porosity regime caused by faults, fracture systems (or a combination), or karst, all of which are based on the geologic structure beneath the site.
Each of these hydro-geologic settings have unique characteristics that require close collaboration with our clients to understand their need for yield and quality, yet remain within in the water-rights permitted to that site. The geologists and geophysicists at Olson Engineering have experience working in all three hydro-geologic scenarios, allowing us to design a geophysical survey to meet your objective.
Applications for geophysical groundwater exploration and resource evaluation investigations include detection of:
- Depth to bedrock / Thickness of alluvium
- Lithology for sand& gravel deposits versus clay layers
- Depth to water table (in saturated, course-grained soils)
- Lateral extent of alluvial deposits for infiltration galleries
- Presence of paleochannels, to identify where bedrock deepens abruptly
- Fault and its antithetic features (e.g., graben)
- Fractures in a bedrock
- Depth to aquatard
- Depth to known aquifer formation(s)
- Difference of saline/brackish water versus fresh groundwater
- Saltwater intrusion in coastal aquifers
- Aquifer Storage Recharge (ASR) delineation
In most circumstances, more than one method is required to effectively determine where to drill a test hole, or a production well. In general the detection of a fault, or series of faults, is not difficult (using seismic); but, determining if water exists along those structures requires applying EM or ER survey techniques. Seismic cannot alone determine the presence of water, and EM or ER are not effective at image structures. We have the capability with this combined-method approach to target both the structure and presence of water. This approach then allows a prediction for the presence of (fresh) groundwater and anticipated depth to intersect structure(s) or water-bearing formations (i.e., aquifers). In unconsolidated alluvial settings the method selection is determined by the objective of finding the overall thickness of the soil deposits, or determining the presence of impermeable clays layers and/or lenses or permeable sand and gravels.
Aquifer Storage Recharge (ASR) is a burgeoning approach to storing groundwater in the porous alluvial deposits in the valley floor of large river drainages. Olson has helped with defining bedrock characteristics in order to understand the lateral continuity of the surface, its character and quality. As well as, aid in the design of the cut-off wall for: depth to the bedrock surface to ensure positive cutoff, avoid obstacles (e.g., landfill materials or indurated soil deposits), and continuity of known soil conditions. Geophysics is a valuable tool to ASR, as drill holes alone cannot cover the entire area impacted by the storage of water below the ground surface.
For groundwater investigations Olson has worked with clientele ranging from home owners to hydrologic consulting companies, as well as municipalities. Due to this wide range of clients we tailor the scale of work and the complexity of the survey to meet the clients’ desire. For example, is purpose of the groundwater investigation to produce a 10 to 15 gpm well for residential consumption, or construction of multiple wells for a high-yield groundwater well field. Similarly, in unconsolidated / unconfined aquifer settings, meeting the need for a single well or aiding in the design of a shallow alluvial gallery is the advantage geophysical imaging provides hydrologists. Understanding the yield you need from groundwater resources beneath a site, dictates how Olson approaches finding drilling target(s).
Olson does not perform borehole geophysical logging for groundwater resource testing. In the western U.S. we encourage using COLOG or Southwest Exploration, Inc. These geophysical log data are extremely useful information to refine surface-based geophysical data to create a better groundwater model.